Wet Look Sealer Application for optimum protection with deep, rich colour

Wet look sealer application is a protective treatment that offers excellent water- and stain-resistance, while also darkening the stone’s natural colour to give a permanent ‘wet look’.

The wet look sealer is a penetrating sealer, sitting inside the surface of the stone and grout without changing the slip coefficient of the stone. It is important to note that while the surface will look wet, the wet look sealer application does not add shine or slipperiness to the stone. It simply enhances the colour.

Wet look sealer application has brilliant results, especially on honed or textured surfaces that would have deeper colour in a polished state. It is often used when clients are using a polished version of a stone inside, and a honed or flamed tile outside, as it makes sure the two textures have a similar depth of colour.

The colour enhancement enriches the natural colour of the stone – charcoal colours turn black, light green turns dark green, however white does not change at all. If you want to see what the stone would look like with an enhancing sealer the best indication is to simply wet the stone. Make sure to dry off the surface water as this gives the stone a shine which is not indicative of the final result.

Obviously there is a small difference between the look of the wet stone and the wet look sealer application, but the only way to tell the proper result is to complete a sample. This is always recommended as enhancing sealers are extremely hard to remove, so once applied sometimes cannot be fully removed.

Wet look sealers generally provide fantastic looks and performance, but they are more problematic with application issues. Slique has had to fix many problems with DIY or trade-applied enhancing sealer applications over the years, as sealer surface residues are common and create a lot of issues. For this reason we do suggest professional application, or at the very least if set on DIY make sure the sealers instructions are explicitly followed. Slique offers a 100% money-back guarantee on all our wet look application services.

Please note: some stone types do not respond well to wet look sealer application so testing is always recommended.

wet look sealer application, wet look sealer, enhancing sealer

* Indicates a required field

Estimate / enquiry details:
  Subscribe me to your newsletter
Auckland New Zealand

Slique New Zealand
PO Box 301 107
New Zealand

Phone: 09 414 2910
Free: 0800 SLIQUE
Website: www.slique.co.nz

Sydney Australia

Slique NSW
14/47 Parramatta Rd
(entry on George St)
Granville NSW 2142

Phone: 02 9648 0395
Free: 1800 SLIQUE
Website: www.slique.com.au